Milling cutter of square shoulder of hill tall Square6 can be used at all sorts of treatment

  • Time:
  • Click:117
  • source:DAHLER CNC Machining
The person that the solution of flexibility of cutting tool of exterior surface roughness of the high quality of 90 ° straight wall with the real cost of lowest of every cutting blade offers the cost with every smaller part milling cutter of Square 6 square shoulder can be used at all sorts of treatment (include planar milling) the different operating mode with wide range. To groovy treatment application, square 6 is the solution of a kind of reliable, economy. It will make a lot of medium or small production treatments reduce cost through reducing level of inventory of its cutting tool. The perfect union Square 6 of the 6 respects economy of every razor blade and property performance has 6 cutting blade, because this can offer every cutting blade for you the economy of lower cost. Bit the horn before axial is negative worth, but on bit cutting blade of horn makes the horn before cutting is be worth, can ensure so high-powered. Film and beforehand range of good cutter hub diameter: 40-160 Mm(1.

50-2.

36 In.

) . The cutter hub of film has longer cutting tool life. Beforehand the razor blade of hard cutter hub and circumjacent grinding can get better public errand raises dependability. Where is result? Be machined the precision with taller spare parts and public errand. Scanty tine, normal pitch mixes 3 kinds of different pitch to age closely. Identical diameter, different tine is counted. You always can be your treatment and operating mode to find appropriate cutting tool. ME09 of 3 kinds of different bit geometry angle are used at stainless steel; M13 to use Yu Gang use at harder data and higher cutting rate with cast-iron; MD15. You always can be mixed for workpiece material / or operating mode finds proper bit geometry point of view. CNC Milling CNC Machining